Rotate the sensor on the front fork to adjust the gap between the sensor and the magnet 5 within 5 mm, and secure it with the nylon ties. Mount the sensor 3 at the appropri- ate position so that the center of the magnet 5 will align with the marked line on the sensor when the wheel is rotated. The computer is combined with the following parts. Installation of the Computer on Your Bike Tire size is usually shown on the sidewall of tires.
You need to know the tire circumference (L cm) be- forehand. When you want to start the odometer from zero,.Used odometer, keep pressing the MODE button for two seconds and input the reading. When you want to input the reading of the currently.Select the measurement unit, kilometer or mile, by pushing the MODE button.
(the screen will show the time measurement in this state) Setting is completed by pushing the SET button. You can easily set it by referring to the chart shown (the odometer starts from the reading you inputted) Stable measurement when you use this system for the first time and every time the battery is replaced. Push three buttons (MODE, START/ STOP and SET) at the same time. (For 1st use or after replacing the battery) Don’t use thinner, benzene or alcohol to wipe the surface of theĬomputer.Avoid unnecessary prolonged exposure to the sun.Keep batteries out of reach of small children.Periodically check to insure they are mounted securely and the screws are not loosen. Be sure to securely mount the magnet, the sensor, and theīracket on your bicycle.Pay attention to the road or trail! Do not be distracted by the.
0 kommentar(er)
